BARTRON Posted September 19, 2017 Share Posted September 19, 2017 hi, i have on both macs green screens but they cant see each other mouse want move between screens mac1: 192.168.7.10 mac2: 192.168.7.21 https://synergy-logs.symless.com/2017-09-19/655-2017-09-19T19-23-23.log Link to comment Share on other sites More sharing options...
HiltonT Posted September 19, 2017 Share Posted September 19, 2017 Exact same issue on 2 PCs here. All green, no action. Link to comment Share on other sites More sharing options...
BARTRON Posted September 19, 2017 Author Share Posted September 19, 2017 have you got many network cards and bridges ? i also use ipv6 i have a lot, i was wounderingif this could cose the problem mac desktop: en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=b<RXCSUM,TXCSUM,VLAN_HWTAGGING> ether 10:c3:7b:9b:e8:4b inet6 fe80::1805:565c:e372:a57f%en0 prefixlen 64 secured scopeid 0x4 inet6 2001:4d48:ad57:3901:1cdb:eb65:edc3:8288 prefixlen 64 inet 192.168.7.10 netmask 0xffffff00 broadcast 192.168.7.255 nd6 options=201<PERFORMNUD,DAD> media: autoselect status: active cxgb1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=2b<RXCSUM,TXCSUM,VLAN_HWTAGGING,TSO4> ether 00:07:43:06:e6:a9 inet6 fe80::185c:4434:8f3:b14a%cxgb1 prefixlen 64 secured scopeid 0x5 inet 192.168.6.100 netmask 0xffffff00 broadcast 192.168.6.255 nd6 options=201<PERFORMNUD,DAD> media: autoselect <full-duplex,flow-control> status: active utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 2000 inet6 fe80::9c8d:87c3:94d4:1bf6%utun0 prefixlen 64 scopeid 0x6 nd6 options=201<PERFORMNUD,DAD> vmnet1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 00:50:56:c0:00:01 inet 192.168.182.1 netmask 0xffffff00 broadcast 192.168.182.255 vmnet2: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 00:50:56:c0:00:02 inet 172.16.246.1 netmask 0xffffff00 broadcast 172.16.246.255 vmnet8: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 00:50:56:c0:00:08 inet 192.168.251.1 netmask 0xffffff00 broadcast 192.168.251.255 laptop: lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 options=1203<RXCSUM,TXCSUM,TXSTATUS,SW_TIMESTAMP> inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 nd6 options=201<PERFORMNUD,DAD> gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 ether 6c:40:08:a6:cb:40 inet6 fe80::877:704c:25db:ba0d%en0 prefixlen 64 secured scopeid 0x4 inet 192.168.7.21 netmask 0xffffff00 broadcast 192.168.7.255 nd6 options=201<PERFORMNUD,DAD> media: autoselect status: active en1: flags=963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX> mtu 1500 options=60<TSO4,TSO6> ether 72:00:06:85:0c:10 media: autoselect <full-duplex> status: inactive en2: flags=963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX> mtu 1500 options=60<TSO4,TSO6> ether 72:00:06:85:0c:11 media: autoselect <full-duplex> status: inactive p2p0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 2304 ether 0e:40:08:a6:cb:40 media: autoselect status: inactive awdl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1484 ether f2:7b:e5:5c:c3:5d inet6 fe80::f07b:e5ff:fe5c:c35d%awdl0 prefixlen 64 scopeid 0x8 nd6 options=201<PERFORMNUD,DAD> media: autoselect status: active bridge0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 1500 options=63<RXCSUM,TXCSUM,TSO4,TSO6> ether 72:00:06:85:0c:10 Configuration: id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0 maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200 root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0 ipfilter disabled flags 0x2 member: en1 flags=3<LEARNING,DISCOVER> ifmaxaddr 0 port 5 priority 0 path cost 0 member: en2 flags=3<LEARNING,DISCOVER> ifmaxaddr 0 port 6 priority 0 path cost 0 nd6 options=201<PERFORMNUD,DAD> media: <unknown type> status: inactive utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 2000 inet6 fe80::c1c9:1014:3f0e:e1fa%utun0 prefixlen 64 scopeid 0xa nd6 options=201<PERFORMNUD,DAD> utun1: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500 inet 10.253.4.2 --> 10.253.4.2 netmask 0xffffff00 utun2: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500 inet 10.253.2.3 --> 10.253.2.3 netmask 0xffffff00 utun3: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500 inet 10.253.6.2 --> 10.253.6.2 netmask 0xffffff00 utun4: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500 inet 10.253.0.6 --> 10.253.0.6 netmask 0xffffff00 utun5: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500 inet 10.254.0.138 --> 10.254.0.137 netmask 0xffffffff utun6: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500 inet 10.253.5.3 --> 10.253.5.3 netmask 0xffffff00 utun7: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500 inet 172.16.253.6 --> 172.16.253.5 netmask 0xffffffff Link to comment Share on other sites More sharing options...
BARTRON Posted September 19, 2017 Author Share Posted September 19, 2017 5 hours ago, BARTRON said: hi, i have on both macs green screens but they cant see each other mouse want move between screens mac1: 192.168.7.10 mac2: 192.168.7.21 https://synergy-logs.symless.com/2017-09-19/655-2017-09-19T19-23-23.log i noticed that i cant find my ip 192.168.7.10 in logs at least the latest one... Link to comment Share on other sites More sharing options...
Synergy Team Nick Bolton Posted September 24, 2017 Synergy Team Share Posted September 24, 2017 This will be fixed in beta5 (due in 4-5 weeks). Need a refund? refunds@symless.com Link to comment Share on other sites More sharing options...
BARTRON Posted September 24, 2017 Author Share Posted September 24, 2017 hi Nick, no refund is not needed, I can wait for new release, meantime i use v1.8 until beta5 is out. thx for reply Link to comment Share on other sites More sharing options...
john K Posted September 25, 2017 Share Posted September 25, 2017 Had similar problem between Ubuntu 64 bit and Windows 10. two machines connected, both sides showed the other machine, but no keyboard and mouse between the two machines. I will wait for beta 5. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.