Synergy Basic is Not working

[PassZZ]

Hello, just purchased synergy basic. Installed on both my client and server but for some reason I am unable to get synergy to work.

I don't know if maybe I cinfigured the thing wrong

[Paul Suarez]

Hi PassZZ. Please do the steps below.

Server

Start with configuring the server.

1. Ensure that the Server checkbox is ticked.
2. Click on the Configure Server button.
3. You can get started on adding your client.
4. You now should see the Screens and Links tab.
5. Drag a new screen down from the icon in the top right.
6. Place the screen relative to the server screen in the center.
7. Double click on the new unnamed screen.
8. Change the unnamed name to match the client computer.
9. Click OK to close the Screen Settings window.
10. The Server Configuration page should show the new screen.

Now that you've added a client, hit OK to take you back to the main screen. You can then click Apply in the bottom right of the window to start the server which will wait for a client to connect. 

Client

Now the server is set up it's time to move on to the client.

1. Ensure that the Client checkbox is ticked.
2. Enter the Servers IP address into the Server IP box. (This is the bold IP address on the servers window)
3. Click Apply to save the configuration.

Now that you've set the client up to connect to the server, hit Start to get it to connect to the server, then wait for it to show it's connected to the server in the feed at the bottom of the window.

This can also be found on our Knowledge Base.