Loadertron 0 Posted January 6, 2016 Share Posted January 6, 2016 Hi, I'm new to Synergy and I have the following layout left to right client 1 1050p, client 2 1080p, server 1 1440p and client 3 1080p. I have no idea how to modify the config so that my mouse will move right from server 1 onto client 3 and left from server 1 onto client 2 then further left onto client 1. If anyone could give me some pointers I'll over the moon. Thanks in advance. L Link to post Share on other sites
Yuya Fujiwara1491393133 0 Posted January 17, 2016 Share Posted January 17, 2016 I supposed you are using 4 PCs, each PC have one display. If it is wrong, please give me additional informations. In the server, open the synergy panel and check "Configure interactively" and press "Configure Server" (Fig.1) [attachment=0]ScreenShot2.png[/attachment] Then you can see a panel (Fig.2) [attachment=1]ScreenShot.png[/attachment] When all clients were connected to the server correctly, you'll find four display icons. Each icon correspond to a PC, not a display. Link to post Share on other sites
Loadertron 0 Posted January 20, 2016 Author Share Posted January 20, 2016 My apologies I didn't explain well enough, it is 2 PCs over 4 monitors. PC 1 taking monitors 1, 2 and 4 and PC 2 taking monitor 3. Thank you for the reply. L Link to post Share on other sites
Yuya Fujiwara1491393133 0 Posted January 20, 2016 Share Posted January 20, 2016 Dear Loaderton, [client 1] - [client 2 ] - [server 3] - [client 4] Monitor 3 is connected to the server, is it correct? Then, [1] On the client PC, configure alignment of 3 displays as follows [client 4] - [client 1 ] - [client 2] I know you think it is not consistent with the actual setup you want, but try it. [2] Synergy settings. in the configuration file, please edit "section:links" part as follows. [code] section: links (your server name, without braces): left = (your client name) right=(your client name) (your client name, without braces): left = (your server name) right=(your server name) [/code] If you want know how to edit configuration file, or my post is not clear for you, please reply. Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now