Major Payne Posted March 27, 2019 Share Posted March 27, 2019 Good Morning, I work from home from time to time. My company is moving from Cisco Anyconnect to Global Protect VPN, with Cisco I was able to use synergy and setup a ddns. I have attempted the same setup withy global protect and it's timing out. Any help is appreciative. Quote Link to comment Share on other sites More sharing options...
Kelvin Tran Posted March 28, 2019 Share Posted March 28, 2019 What Synergy version? If you're using S2, I'd try using Synergy 1 and manually setting the server IP if possible over the VPN connection. Quote Link to comment Share on other sites More sharing options...
Major Payne Posted March 28, 2019 Author Share Posted March 28, 2019 I'm using S1, i can try Quote Link to comment Share on other sites More sharing options...
Major Payne Posted March 28, 2019 Author Share Posted March 28, 2019 Same issue, it won't connect via IP address. Quote Link to comment Share on other sites More sharing options...
Major Payne Posted May 29, 2019 Author Share Posted May 29, 2019 I am still getting this issue. As this program is not a supported program from my company they will not help me troubleshoot. Quote Link to comment Share on other sites More sharing options...
princess Posted October 1, 2019 Share Posted October 1, 2019 I am also interested in hearing from Symless/Synergy about this issue. We are moving from AnyConnect to Global Protect and I can't connect to my server from the client. I am currently running Synergy 1 Pro(1.10.3-stable-xxx) on both of my Mac laptops, and they are both running the latest version of Mac OS Mojave. Quote Link to comment Share on other sites More sharing options...
fnkstr Posted November 12, 2019 Share Posted November 12, 2019 (edited) I just started having this issue after switching my setup a bit. I have a fritz.box running my cable internet, and behind it is an asus GT-AX11000 with 2 mesh nodes running in access point mode since yesterday. (I had it set up to be wireless router first, but connected to the fritz.box) the fritz is running an IP address space 10.1.10.x, the asus was running a 192.168.50.xx. since I switched it into access point mode (meaning DHCP is handled by fritz.box again) synergy stopped working as long as GLobalprotect is active and pings to my 10.1.10 devices dont get through. I saw that the standard gateway in globalprotect starts with a 10. too, so its a 10.459.xxx.xxx as standard gateway. it's a bit too late here atm to test and change my firtz.box IP address range, but ... this does look like it could be causing an issue the weird bit is though, before i bought the asus router, synergy worked fine with the original setup just with the fritzbox... Edited November 12, 2019 by fnkstr Quote Link to comment Share on other sites More sharing options...
fnkstr Posted November 12, 2019 Share Posted November 12, 2019 19 minutes ago, fnkstr said: I just started having this issue after switching my setup a bit. I have a fritz.box running my cable internet, and behind it is an asus GT-AX11000 with 2 mesh nodes running in access point mode since yesterday. (I had it set up to be wireless router first, but connected to the fritz.box) the fritz is running an IP address space 10.1.10.x, the asus was running a 192.168.50.xx. since I switched it into access point mode (meaning DHCP is handled by fritz.box again) synergy stopped working as long as GLobalprotect is active and pings to my 10.1.10 devices dont get through. I saw that the standard gateway in globalprotect starts with a 10. too, so its a 10.459.xxx.xxx as standard gateway. it's a bit too late here atm to test and change my firtz.box IP address range, but ... this does look like it could be causing an issue the weird bit is though, before i bought the asus router, synergy worked fine with the original setup just with the fritzbox... sorry, no gateway is specified in Globalprotect (automatically detected as a 185.xx.xx.xx, but the DNS servers are on 10.48.xx.xx addresses. Quote Link to comment Share on other sites More sharing options...
fnkstr Posted November 13, 2019 Share Posted November 13, 2019 and weirdly enough, 10 hours later it's working, just like that... wtf Quote Link to comment Share on other sites More sharing options...
Guest Posted November 19, 2019 Share Posted November 19, 2019 Hello @fnkstr Would you dont mind to place a ticket for us ( Synergy Support Team ) using link in my signature? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.