AverageJoe 0 Posted July 3, 2017 Share Posted July 3, 2017 I installed Synergy on my Windows 10 PC in server mode and allowed it through my firewall; the application runs fine. I installed Synergy on my Mac laptop in client mode but the status says "Synergy is starting" and never changes to Synergy is running as on my server. The log states that the connection to server has timed out and it keeps trying to connect to the server. When I start up the client app (on the mac laptop), the server app (on the windows PC) detects that there is a new client and asks me to place the client on the map. However, when I move the mouse to the designated border, the mouse does not transfer over, nor does the mouse toggle to my client (mac laptop) when I hit the hotkey combination I configured. (meanwhile, the client side still says "Synergy is starting" and cycles through multiple connection timeouts. Please advise. Link to post Share on other sites
Paul Suarez 107 Posted July 3, 2017 Share Posted July 3, 2017 Hi @AverageJoe! Please provide more details about your machines (OS, 32/64 bit, Synergy version installed, connected to the network via Ethernet or Wi-Fi, specify which one is the server). Also, post a screenshot of both machine's Synergy interface and the Server Configuration interface on your server machine. Link to post Share on other sites
AverageJoe 0 Posted July 6, 2017 Author Share Posted July 6, 2017 Hello Paul, I fiddled around with the settings and somehow both machines see each other and K&M transfer over. What I am trying to figure out at the moment is how to create one hotkey combo to toggle between the computers on the synergy map. It's annoying to create a different hotkey for each computer on the map. Could you please help out with this? Link to post Share on other sites
Paul Suarez 107 Posted July 11, 2017 Share Posted July 11, 2017 Hi @AverageJoe. Is it for switching to the other computer and switching back? Link to post Share on other sites
AverageJoe 0 Posted July 11, 2017 Author Share Posted July 11, 2017 Yes sir. I have 2 hotkey combos set up. One to mive to the mac and another to move to the windows PC. I need help creating one hotkey combo that toggles between both computers. Link to post Share on other sites
Paul Suarez 107 Posted July 18, 2017 Share Posted July 18, 2017 Hi @AverageJoe. I was able to create a configuration file that would allow you to only use one hotkey to toggle between two machines. I just want to verify two things before sharing it to you. What hotkey would you want to use to toggle? (I currently have set mine to use Ctrl+`. Would you want to switch screens using only that hotkey? or would you still want to switch screens with moving the mouse cursor the other machines direction? Link to post Share on other sites
AverageJoe 0 Posted July 18, 2017 Author Share Posted July 18, 2017 Thank you for your reply @Paul Suarez. I would like the toggle to be Ctrl+LeftShift+z please. Regarding point 2, I prefer to switch screens only when I use the hotkey. Thank you. Link to post Share on other sites
Paul Suarez 107 Posted July 18, 2017 Share Posted July 18, 2017 I'll save the "you're welcome" part when it completely works on your setup @AverageJoe. Can you post your current configuration here together with the screen resolution information for your monitors? Link to post Share on other sites
AverageJoe 0 Posted July 18, 2017 Author Share Posted July 18, 2017 (edited) Sure thing @Paul Suarez. Could you elaborate on the "current configuration" request? What exactly would you like to know? I use a Windows PC and macbook air on 1 monitor. The monitor's default resolution is 1920 x 1080. Edited July 18, 2017 by AverageJoe Link to post Share on other sites
Paul Suarez 107 Posted July 18, 2017 Share Posted July 18, 2017 On your Server's Synergy user interface, please click on File Click on Save configuration as... Save it to your preferred location Send us a copy of the configuration file Link to post Share on other sites
AverageJoe 0 Posted July 18, 2017 Author Share Posted July 18, 2017 I sent you the config file via email (Subject: ATTN: PAUL SUAREZ) Link to post Share on other sites
Paul Suarez 107 Posted July 18, 2017 Share Posted July 18, 2017 I sent you a private message @AverageJoe. Link to post Share on other sites
Paul Suarez 107 Posted July 18, 2017 Share Posted July 18, 2017 I replied just now @AverageJoe. Let me know how it goes. Link to post Share on other sites
AverageJoe 0 Posted July 18, 2017 Author Share Posted July 18, 2017 It works perfectly but it lags a little from time to time. I always wondered, does Synergy work over my local network or does it need an internet connection to function? I'm not sure if the lags are due to heavy internet traffic or local network traffic. Either way, thank you very much! Link to post Share on other sites
Paul Suarez 107 Posted July 18, 2017 Share Posted July 18, 2017 For Synergy v1.x.x, it doesn't need Internet connection. Are you using Wi-Fi network for both machines? Link to post Share on other sites
AverageJoe 0 Posted July 19, 2017 Author Share Posted July 19, 2017 Ok, thank you. Yes, WiFi on both machines. Link to post Share on other sites
Paul Suarez 107 Posted July 19, 2017 Share Posted July 19, 2017 What Synergy version do you have on each of your machines? Do you have an Ethernet port for each of them? Do you have 64 bit system on both of them? Link to post Share on other sites
AverageJoe 0 Posted July 19, 2017 Author Share Posted July 19, 2017 On my windows machine (server) & macbook (client), I have 1.8.8-stable-25a8cb2.I have an ethernet port on my Windows machine but no ethernet port on my macbook air. However, one can be used via a thunderbolt to ethernet adapter. Both machines are running 64bit OSs. I noticed a bug in the config file you sent me. On the windows machine (server), if I move the mouse to either edge of the monitor (left or right edges), the mouse pops up out of the other edge as if the left and right edges are stitched together. Link to post Share on other sites
Paul Suarez 107 Posted July 19, 2017 Share Posted July 19, 2017 Hi @AverageJoe. I guess that's because the config file I made is to have a wrapped around configuration. Virtually, your screens are looped. Like if we haven't set it to only switch with the Ctrl+Shift+z hotkey, moving your mouse to the left edge of the machine on the left will result to mouse getting to the right edge of the machine at the right. This happens on your current configuration when it's the first time you booted your machine or even with just the Synergy. Best practice with that config file I made for you is to perform the switch twice before actually using it. So it's like perform Ctrl+Shift+z first (it switches from server to client) then do it again (switches back to server from client). This ensures that scroll lock is triggered on both machines before actually using it. Or if still acts out while in the Windows machine, press scroll lock on your keyboard (do it on your on_screen keyboard if your physical keyboard doesn't have one) while your mouse cursor is in your Windows machine's screen. Link to post Share on other sites
AverageJoe 0 Posted July 19, 2017 Author Share Posted July 19, 2017 Great! I appreciate your help! Link to post Share on other sites
Paul Suarez 107 Posted July 20, 2017 Share Posted July 20, 2017 You're most welcome @AverageJoe. Link to post Share on other sites
AverageJoe 0 Posted October 12, 2018 Author Share Posted October 12, 2018 Hi @Paul Suarez I'm having the same problem with version 2. Would it be possible to create a config file with the same functionality as the previous one? (transfer K&M with Shift + Ctrl + z)? Link to post Share on other sites
Guest Posted October 19, 2018 Share Posted October 19, 2018 @AverageJoe Have you tried Synergy 1? Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now