Daniel Alarcon 20 Posted August 4, 2020 Share Posted August 4, 2020 @hcarter004 Synergy 3 will do custom multi-monitor positioning better. For now, you an try switching using a Hotkey to avoid traveling around monitors to get to the other computers, in case that helps. 1 Link to post Share on other sites
Sooner266 1 Posted August 14, 2020 Share Posted August 14, 2020 Hey all, I have found a workaround for those of us with certain monitor layouts, like my 3x server and 1x client centered above. By saving and editing a server configuration file, I was able force the corner size to the width of my outer monitors, making synergy ignore them completely. Here are steps to do this, all on the server: Select File > "Save configuration as..." and save the file somewhere. Easiest to use .sgc extension though it doesn't force you. Open the file in a text editor, and find this line: switchCornerSize = 0 Change to desired width on one side. I have 3x 1920x1080, so I used corner size 1920. Change the server to "Use existing configuration" and point to the file and apply it. You'll of course have to redo this anytime you want to change your settings interactively since it's validated anytime you open/accept the configure screen, but hopefully will hold you over until v3. 1 Link to post Share on other sites
dubdub 3 Posted August 25, 2020 Share Posted August 25, 2020 A variation involves editing the links section of the config file, as explained in another forum thread. The idea isn't mine, but it is extremely flexible. Still working in 1.11. Link to post Share on other sites
mehdi 0 Posted September 14, 2020 Share Posted September 14, 2020 hello, i have 6 monitors and have a question on setup... PC (host/server for synergy), this has 4 monitors Macbook this has 2 monitors (macbook monitor + external monitor) the macbook is above the far left monitor for my pc. yellow circle is PC (synergy server) Blue circle in picture is Mac what should my dead corner check boxes be and the corner size? and should the mac be above the pc in the screens and links box? thanks Link to post Share on other sites
Shaun S 0 Posted November 3, 2020 Share Posted November 3, 2020 I would really like to see a feature implemented that would recognize the Synergy server/host monitors as separate screens for the layout. I understand Synergy is a very inexpensive tool, but this feature should at least be included in the "Pro" version (which I've purchased). Seems like a very crucial feature to include when so many of us have multiple screens now... What would it take? Link to post Share on other sites
km-link 0 Posted January 16, 2021 Share Posted January 16, 2021 I have the exact same problem. Now I have to travel to the right most monitor and move my mouse to bottom dead corner to switch screen. I think this issue deserves a priority and Synergy 1 Pro users would definitely want this ASAP since 3 is planned to be released in 2023. Correct me if I'm wrong. Link to post Share on other sites
harvey_uk 0 Posted February 1, 2021 Share Posted February 1, 2021 (edited) Multiple monitors need a space in synergy server setup. For example a pc with say 2 screens, then a laptop as a third screen. You want to setup the synergy server in the screens and links tab, you have pc1 as one box, leave one blank box, then laptop as third box. Edited February 1, 2021 by harvey_uk Link to post Share on other sites
Tomauzi 0 Posted February 25, 2021 Share Posted February 25, 2021 (edited) I´m not able to config my setup as desired, altough synergy is a great tool. My 4 Display Setup: (3 Displays at Desktop, 1 at Client Notebook) Server 3 - Client Server 1 - Server 2 Setting in Synergy --- Client Server ------ ->I can not reach the client. When I set in Synergy Client ----- Server ---- I can reach the client while going over the top of Server3 First I tought that I did not fully understand the instructions, but thanks to this thread, I learned that I´m not alone ? Please add config for Multi-Monitor Setup in Synergy1, as 2023 is way long in the future.... Edited February 25, 2021 by Tomauzi Link to post Share on other sites
dubdub 3 Posted May 24, 2021 Share Posted May 24, 2021 @mehdi Your arrangement can be roughly represented as: MMM MMM WWW WWW WWW - ignoring the top right Windows screen for simplicity. Synergy effectively treats the three Windows screens as a single monitor, and the two Mac screens as another single monitor. So, the left-most Windows screen is effectively one-third of the "total" Windows monitor; when the cursor leaves this screen to the top, you want it to enter the right-most half of the "total" Mac monitor, and vice versa when moving down from the right-hand Mac screen to Windows. I think you should be able to achieve this in the links portion of the config file, like so: section: links WWW_monitor: up(0,33) = MMM_monitor(50, 100) MMM_monitor: down(50,100) = WWW_monitor(0,33) As noted in this thread, Synergy does not cope with L-shaped arrangements of multiple screens belonging to either the server or the client (as far as I am aware) - so you might need to adjust the figures in the above example to allow for the fourth WWW monitor I ignored in my diagram. Like others have noted, it would be good to get some official input from Symless. This is a long-standing issue, and now appears destined to remain so until (at least...) 2023. 1 Link to post Share on other sites
mehdi 0 Posted May 24, 2021 Share Posted May 24, 2021 7 hours ago, dubdub said: @mehdi Your arrangement can be roughly represented as: MMM MMM WWW WWW WWW - ignoring the top right Windows screen for simplicity. Synergy effectively treats the three Windows screens as a single monitor, and the two Mac screens as another single monitor. So, the left-most Windows screen is effectively one-third of the "total" Windows monitor; when the cursor leaves this screen to the top, you want it to enter the right-most half of the "total" Mac monitor, and vice versa when moving down from the right-hand Mac screen to Windows. I think you should be able to achieve this in the links portion of the config file, like so: section: links WWW_monitor: up(0,33) = MMM_monitor(50, 100) MMM_monitor: down(50,100) = WWW_monitor(0,33) As noted in this thread, Synergy does not cope with L-shaped arrangements of multiple screens belonging to either the server or the client (as far as I am aware) - so you might need to adjust the figures in the above example to allow for the fourth WWW monitor I ignored in my diagram. Like others have noted, it would be good to get some official input from Symless. This is a long-standing issue, and now appears destined to remain so until (at least...) 2023. thank you! silly and very basic question...where do i enter the above configs w links? right now in my server configuration tab i have Mac (monitor icon) and Windows (monitor icon) in the side by side boxes in the middle row in the screens and links tab. Link to post Share on other sites
Popular Post dubdub 3 Posted May 25, 2021 Popular Post Share Posted May 25, 2021 12 hours ago, mehdi said: thank you! silly and very basic question...where do i enter the above configs w links? right now in my server configuration tab i have Mac (monitor icon) and Windows (monitor icon) in the side by side boxes in the middle row in the screens and links tab. On the server config page, check "Use existing configuration" instead of "Configure interactively". You will then need to create a configuration file, which, if I recall correctly, Synergy will give an *.sgc extension. Feel free to use mine as a starting point, see below. For reference, my screens are arranged as: Fractal Dell_laptop surface-pro-3 Hope that helps. section: screens Fractal: halfDuplexCapsLock = false halfDuplexNumLock = false halfDuplexScrollLock = false xtestIsXineramaUnaware = false switchCorners = none +bottom-left switchCornerSize = 99 Dell_laptop: halfDuplexCapsLock = false halfDuplexNumLock = false halfDuplexScrollLock = false xtestIsXineramaUnaware = false switchCorners = none switchCornerSize = 0 surface-pro-3: halfDuplexCapsLock = false halfDuplexNumLock = false halfDuplexScrollLock = false xtestIsXineramaUnaware = false switchCorners = none switchCornerSize = 0 end section: aliases end section: links Fractal: right = Dell_laptop down(90,100) = surface-pro-3(0,10) Dell_laptop: left = Fractal surface-pro-3: up(0,10) = Fractal(90,100) end section: options relativeMouseMoves = false screenSaverSync = true win32KeepForeground = false disableLockToScreen = false clipboardSharing = true clipboardSharingSize = 3072 switchCorners = none switchCornerSize = 0 keystroke(Control+Alt+Shift+Left) = switchToScreen(Fractal) keystroke(Control+Alt+Shift+Up) = switchToScreen(Dell_laptop) keystroke(Alt+Control+Shift+Right) = switchToScreen(surface-pro-3) end 2 Link to post Share on other sites
Deanna Hood 0 Posted August 10, 2021 Share Posted August 10, 2021 DisplayFusion is the best multi monitor setup but there are some similar programs, DisplayFusion alternatives will act the hero on the off chance that you think that its hard to work your multi-screen arrangement. Regardless of whether it is tied in with moving windows between screens, taking the cursor to the next screen absent a lot of problem or getting taskbars on every one of the screens, these product here will help you do every one of these activities easily. The program being referred to has various benefits to it, for example, backdrop the executives, multi-screen taskbars, pre-arranged capacities and the alternative to design show settings and saving them as Monitor Profiles for moment initiation. For more data in regards to comparative utilities, you can look at the substitutes i have here. Link to post Share on other sites
Foxgguy2001 1 Posted August 10, 2021 Share Posted August 10, 2021 Hoping to find a little bit of help here too. I think I may have an issue with my configuration file that's preventing me from linking monitors correctly. Hoping someone wouldn't mind having a look and pointing me in the right direction! Here is my config. As I understand it the links section is a percentage, correct? This doesn't seem to work though. Thanks for having a look! section: screens 3XD-Odin: halfDuplexCapsLock = false halfDuplexNumLock = false halfDuplexScrollLock = false xtestIsXineramaUnaware = false switchCorners = none switchCornerSize = 0 JOSHS-PC: halfDuplexCapsLock = false halfDuplexNumLock = false halfDuplexScrollLock = false xtestIsXineramaUnaware = false switchCorners = none switchCornerSize = 0 end section: aliases end section: links 3XD-Odin: down(0,100) = JOSHS-PC(40,70) JOSHS-PC: up(40,70) = 3XD-Odin(0,100) end section: options relativeMouseMoves = false screenSaverSync = true win32KeepForeground = false disableLockToScreen = false clipboardSharing = true clipboardSharingSize = 3072 switchCorners = none switchCornerSize = 0 end 1 Link to post Share on other sites
Ding 1 Posted April 22, 2022 Share Posted April 22, 2022 I'm having this same problem configuring a layout with a portrait monitor to the left of a landscape one. Synergy is grabbing the top of the portrait monitor to enter the client configured above it, however the real-world orientation is the client monitor above the landscape one. I've tried a few of the solutions here without success. I'm going to resort to the hotkey setup suggested. The ludicrous part of this is that it used to work just fine until I shuffled monitor cables around moving my desk. I've played with the monitor cables along with system and Synergy configurations trying to get back to where things worked but can't seem to get it. 1 Link to post Share on other sites
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now